Maranda High KCSE Mock Exams Physics Paper 1

MARANDA HIGH SCHOOL

The Kenya Certificate of Secondary Education

 MOCK EXAMINATION

232/1            Physics (Theory)         Paper 1

                    Time: 2 Hours

 

 

Name: ………………………………………….…….……         Adm No: ………………

Stream: ……………………….. Signature: …………….

Instructions to Candidates

1. Write your name and Admission number in the spaces provided above.
2. Sign and write the date of examination in the spaces provided above
3. This paper consist of TWO sections; A and B. Answer ALL the questions in section A and B in the spaces provided.
4. ALL working MUST be clearly shown. Mathematical tables, electronic calculators and slide rules may be used.
5. Take: ,
6. This paper consists of 15 printed pages. Candidates should check the question paper to ensure that all the pages are printed as indicated and that no questions are missing.

 

 

For Examiner’s Use Only

 

SECTION	Question	Maximum Score	Candidate’s Score
A	1-13	25
B	14	11
	15	11
	16	09
	17	11
	18	13
TOTAL		80

 

Hot Downloads!!

Physics Topic By Topic Questions And Answers (All Topics)

Free Physics notes, revision questions, KCSE past Papers, Exams, Marking Schemes,…

Free Secondary and Primary school notes, exams, schemes, lesson plans, revision…

Free updated schemes of work for all subjects (Secondary; Form 1-4)

KCSE Topical Revision Resources For All Subjects (Topic By Topic Questions…

Topic by Topic Revision Questions Free Downloads (All Form 1, 2,…

More Free Physics Resources.

PHYSICS FORM ONE NOTES LATEST

Free Physics notes, revision questions, KCSE past Papers, Exams, Marking Schemes, Topical revision materials, Syllabus and Many more

Physics free lesson plans for all topics (Form one to four)

Physics Simplified Notes Form 1 to 4 Free

Physics Topic By Topic Questions And Answers (All Topics)

Physics Form 3 Notes, Revision Questions And Answers

Physics Form 2 Notes, Revision Questions And Answers

SECTION A(25 MARKS)

Attempt all questions in this section in the spaces provided

• Figure 1(a) and (b) shows the change in volume of a liquid in a measuring cylinder when an irregular solid is immersed in it.

Figure 1(a)                        Figure 1(b)

Given that the mass of the solid is 21.0 g, determine the density of the solid       (2 marks)

………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………

2. Figure 2 shows a glass tube with water fitted with two identical thermometers A and B. It is heated as shown.

Figure 2

State with reason which of the two thermometers shows a higher temperature.     (2 marks)

……………………………………………………………………………………………………………….………………………………………………………………………………………………………………………………………………………………………………

3. Two identical samples of bromine vapor are placed in identical gas jars A and B. A has some air in it and B is a vacuum. State with a reason which sample diffuses sooner.

(2 marks)

 

………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………

4. Figure 3 shows a clinical thermometer which is not graduated.

 

Figure 3

 

1. Name the part indicated with letter X …………………………………………. (1 mark)
2. State the function of the part labeled Y. (1 mark)

…………………………………………………………………………………….………………………….……………………………………………………………………

5. Figure 4 (a) shows a capillary tube immersed in water.

                                                                    Figure 4

Using figure 4(b), sketch to show the appearance of the mercury level in the capillary tube if it was inserted in mercury assuming equal diameters of the tubes  (1 mark)

 

 

6. An oil drop has a diameter of 0.05cm. It forms a circular oil film of diameter 20cm when dropped on the surface of water. Determine the thickness of the molecule.     (3 marks)

………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………

7. State one factor that determine the spring constant of a helical spring. (1 mark)

………………………………………………………………………………………………………..……………………………………………………………………………………

8. Figure 5(a) shows water enclosed by a piston in a cylinder while figure 5(b) show air enclosed by an identical piston in a cylinder

Figure 5(a)                                      Figure 5(b)

 

Equal inward force F is applied on the piston of the two cylinders. Giving reason, state the pistonthat moves in more.                                                                                       (2 marks)

 

………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………

 

9. Figure 6 shows a bottle containing hot water.

Figure 6

 

Explain how the stability of the bottle changes as water cools to room temperature    (2 marks)

………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………

10. Waves are a branch of physics. State what it deals with (1 mark)

………………………………………………………………………………………………………………………………………………………………………………………………

11. a) A car undergoes uniform retardation to rest from 10m/s covering a distance of 25m. Determine its deceleration (2 marks)

 

………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………..

1. Figure 7 (a) shows a displacement time graph for the motion of a particle

On the axes in figure 7 (b) sketch a velocity time graph for the same motion    (1 mark)

12. A uniform meter rule of mass 150 g is pivoted freely at the 0 cm as shown in figure 8

Figure 8

 

Determine the value of the force F needed to ensure that the rule has horizontal equilibrium                                                                                                            (2 marks)

 

………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………

13. Figure 9 shows two balls suspended from threads a short distance apart.

Figure 9

A stream of air is blown between the balls in a horizontal direction. Explain what is observed.                                                                                              (2 marks)

……………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………….

 

 

 

 

SECTION B (55 MARKS)

Answer ALL the questions in this Section

14. a) Define the term centripetal force (1 mark)

…………………………………………………………………………………………………………………………………………………………………………………………

1. When a car is traveling on a mud road, mud flies off the fast spinning wheels, Explain this observation                                                                  (1 mark)

 

…………………………………………………………………………………………………………………………………………………………………………………………

1. Figure 10 shows the path of a stone attached to a string whirled in a space in a horizontal circle.

Figure 10

Sketch on the diagram the path the body follows if the string breaks when the body is at the position shown.                                                                                       (1 mark)

 

11. Two masses and are connected by alight string and are in uniform circular motion on a horizontal frictionless surface as shown in figure 11.  The masses describe circles of radii  and  respectively and the angular velocity of the masses is .

Figure 11

• Which of the two masses is moving faster? Give a reason for your answer.(2 marks)

 

………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………

• Determine the:

1. Centripetal force on (2 marks)

………………………………………………………………………………………………………………………………………………………………

1. Centripetal force on (2 marks)

………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………

• The tension T on the string (2 marks)

………………………………………………………………………………………………………………………………………………………………

15. a) What is meant by the term specific latent heat of vaporization. (1 mark)

…………………………………………………………………………………………………………………………………………………………………………………………

1. In an experiment to determine the specific latent heat of vaporization of water, steam at 100⁰C was passed into water contained in a well lagged copper calorimeter. The following measurements were made.

Mass of calorimeter =50 g

Initial mass of water =70 g

Final mass of calorimeter + water + condensed steam = 123 g

Initial temperature of water + calorimeter = 5⁰ C

Final temperature of mixture = 30⁰C

(Specific heat capacity of water = 4200Jkg^-1K^-1and specific heat capacity of copper = 390 Jkg^-1K^-1)

 

Determine:

1. Mass of the condensed steam.                   (2 marks)

………………………………………………………………………………………………………………………………………………………………………………

1. Heat gained by calorimeter and water                    (3 marks)

………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………

• Given that is the specific latent heat of vaporization  of steam

1. Write a simplified expression for the heat given out by steam.         (2 marks)

………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………

1. Determine the value of                    (3 marks)

………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………

…………………………………………………………………………………

 

 

 

 

 

16. a) Figure 12 shows a set-up which may be used to verify one of the gas laws

Figure 12

1. State the law which the set-up may be used to verify                          (1 mark)

………………………………………………………………………………………………………………………………………………………………………………

1. Name two measurements that should be taken in order to verify the law stared in (i) above                                        (2 marks)

………………………………………………………………………………………………………………………………………………………………………………

• Explain how the set-up can used to verify the law named in (i) above. (3 marks)

………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………

1. A gas occupies 3m³ at a temperature of at normal atmospheric pressure.  Determine  its volume at the same pressure if the temperature is increased to                                                                                                             (3 marks)

 

………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………

17. a)State the law of conservation of linear momentum. (1 mark)

…………………………………………………………………………………………………………………………………………………………………………………………

1. Distinguish between elastic and inelastic collision. (1 mark)

………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………

1. A lorry of mass 2000kg traveling at 20m/s collides with a car of mass 800kg traveling at 30m/s in the opposite direction. The impact takes 2 seconds before the two bodies move with a common velocity.

Determine:

• The common velocity (3 marks)

……………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………

• The impulsive force (2 marks)

………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………

 

 

1. Figure 13 shows a ball bearing falling through glycerin

Figure 13

• Name the TWO forces acting on the ball bearing. (2 marks)

………………………………………………………………………………………………………………………………………………………………………………

• Write down an equation relating all the forces in (i) above when the ball bearing attains a constant velocity. (1 mark)

 

………………………………………………………………………………………………………………………………………………………………………………

• The graph in figure 14 shows the motion of the ball bearing through the above liquid.

Figure 14

On the same axes above sketch the graph to represent the motion of the ball bearing through alcohol.                                                                                    (1 mark)

 

 

 

 

 

 

 

18. a) Figure 15(a) shows a solid object being lowered into a jar full of water and figure 15(b) the subsequent upthrust-depth graph as it is immersed in water. The tension of the string when the block is fully immersed is 3.0 N

Figure 15(a)                               Figure 15(b)

Determine the:

• Length, of the object     ……………………………………………        (1 mark)
• Upthrust U when the object is fully immersed in water …………………… (1 mark)
• Weight W of the object (2 marks)

………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………

• Density of the object       (2 marks)

………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………

 

1. Figure 16 shows a buoy, B, of volume 40 litres and mass 10 kg. It is held in position in sea water of density 1.04 gcm^-3 by a light cable fixed to the bottom so that  of the volume of the buoy is below the surface of the sea water.

 

 

 

 

 

 

 

 

Figure 16

 

Determine:

• Upthrust on the buoy                           (3 marks)

………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………

• The tension T in the cable.                                                                  (1 mark)

………………………………………………………………………………………………………………………………………………………………………………

 

 

 

 

 

1. Figure 17 shows a diagram of a hydrometer which is suitable for measuring the densities of liquids varying between and

Figure 17

 

• State the reason why the bulb is wide. (1 mark)

………………………………………………………………………………………………………………………………………………………………………………

• State the purpose of the lead shots in the glass bulb (1 mark)

………………………………………………………………………………………………………………………………………………………………………………

1. On the diagram indicate the label corresponding toand         (1 mark)

 

 

 

 

 

 

 

 

THIS IS THE LAST PRINTED PAGE